Forum Discussion

Sam_L's avatar
Sam_L
Trusted Cover User
5 years ago
Solved

Software ID for 2 MYOB Files

I work with 2 MYOB Files.   I have set up one of files for STP and connected to the ATO via Access Manager with the Software ID number.   When I have tried to set up my second file for STP, MYOB ...
  • Andrew_Y's avatar
    Andrew_Y
    5 years ago

    Hello Sam ( Sam_L )

     

    With regards to how Software ID’s are generated, and which ones apply for different kinds of users this help article Connect to the ATO for Single Touch Payroll Reporting outlines which methods generate what sort of Software IDs. 

     

    For Access Manager this link from the ATO Forums may shed some light on what IDs are being both generated, and applied Adding Software ID’s for multiple …STP as well as this post SSID Generation – STP 

     

    If this has helped find the information you need, kindly consider marking this post as a solution so others looking for information can find it easier too.

Andrew_Y's avatar
Andrew_Y
Former Staff
5 years ago

Hello Sam ( Sam_L )

 

With regards to how Software ID’s are generated, and which ones apply for different kinds of users this help article Connect to the ATO for Single Touch Payroll Reporting outlines which methods generate what sort of Software IDs. 

 

For Access Manager this link from the ATO Forums may shed some light on what IDs are being both generated, and applied Adding Software ID’s for multiple …STP as well as this post SSID Generation – STP 

 

If this has helped find the information you need, kindly consider marking this post as a solution so others looking for information can find it easier too.

  • Romu's avatar
    Romu
    Partner
    5 years ago

    We have a client that has more than employee who prepare the payroll, but as per the link the option of adding another declarer isn't working as per instructions.  When the second employee goes into Payroll reporting centre it goes stright to the reporting centre with the tabs at the top report, employee termination, EOFY, ATO settings. If you click on ATO settings the only option to update is the STP settings meaning you go through the whole process and it gives you a different software id - is this the correct way to add multiple lodgers?

    Thanks

    • Andrew_Y's avatar
      Andrew_Y
      Former Staff
      5 years ago

      Hello Romu 

       

      Thank you for your post.  As the original post applies to what sort of ID should be used for multiple company files, your situation is a little bit different.

       

      In Adding a declarer for STP (clickable link within the above Connect to ATO link) you may want to confirm if you are signed in with the appropriate employee if setting up for the first time per employee. (see image below for exerpt from help article)

       

       

      If they have been set up already you can check in What happens after I've set up Single Touch Payroll?

       

      Hope that helps you with your issue and kindly consider leaving a kudos if this has solved your problems with STP reporting.